When using the connector, it must be used and stored correctly to avoid unnecessary trouble.
When receiving the connector, we must carefully observe the outer packaging to see if there is any obvious damage, and also to see if the connector itself is damaged, etc., we must ensure that we see it.
The connector is intact, so that it will not affect our use of the connected machine.
When you don’t use the connector for the time being, don’t place the connector arbitrarily, especially in a sunny place. If you forget to place it due to negligence, the connector will be damaged due to long-term sunlight exposure, which will affect the quality of the connector. His use may even cause safety accidents, so we must carefully remember where the connector can be stored, and must not cause safety accidents due to negligence.
Connectors should not be placed in high temperature places. Continuous high temperature or high humidity will damage the connectors, especially in the environment with chemicals, the connectors will be corroded, and the metal protective layer on the outside will lose its protection. The effect of this causes the destruction of the current lines inside. Without the normal conductive function, it becomes a waste.
When you need to move the connector, don't panic. Be careful to avoid the connector from touching hard objects and causing damage to the connector. Don't put it under heavy objects to avoid crushing the connector.
There is another enemy of the connector, that is, grease-like objects. During storage or use, if you touch the grease-like objects, the connector will lose its original function and become an obstacle that affects our work.
